OB 4 Inch Cue Extension
The OB Cue Extension
4 inch black extension to screw into the back of OB Pool Cues. You
will receive the extension along with a replacement rubber bumper
with a screw attached to it. Simply pull off the existing rubber
bumper from the back of your OB cue and screw in the new bumper with
the screw attached to it. Then once you are ready to use your
extension you can quickly attach it to the back of your cue as the
extension comes with a quick release joint. You can leave it on your
cue all the time or only use it when you need some extra reach.
The extension weighs 2.5oz and the extension bumper with aluminum
screw weighs 0.4oz (FYI: The original OB bumper that you will remove
from your cue weighs 0.2oz).
Combine with our 8in Extension for extended reach!
If you own more than one OB Cue, you can also purchase additional
bumpers with screws so that you can switch the extension out on your
cues.
Please Note: To properly tighten down the extension bumper with
aluminum screw, you will need to use a 5mm allen wrench (not
included).